Castle Creation Talon 15A speed controller 3.4 gr
52.00€
Input Voltage Range: min: 2S LiPo, max: 4S LiPo
Max Continuous Amperage at full throttle: 15 amps
BEC Voltage: 5.5 volts
BEC Output: 8 amp peak, 3 amp continuous
Size:
- Width: 14.7mm (0.58″)
- Length: 27.9mm (1.10″)
- Depth: 8.1mm (0.32″)
Weight (with wires): 11 g (0.25 oz.)
Weight (without wires): 3.4 g (0.12 oz.)
Telemetry Link Capable: Yes, except Battery Current
- Description
- Reviews (0)
Description
Castle Creation Talon 15A Introduction:
Talon 15A controller with an outlandish 8 amp BEC. Applications range from foamies to micro, and sub-micro helis running up to 4S and pulling 15 amps. As with any Castle ESC, the Talon 15 offers Castle’s industry-leading functions, and easy programming using the Castle Link USB adapter (coupon for free Castle Link included), or the Castle Field Link Portable Programmer (sold separately).
Power System Alerts: | The Talon ESCs are programmed to sound a number of tunes and codes using the motor as well as flashing LED patterns to alert users to certain conditions regarding their power system, such as over temperature, excessive load and locked head speed. |
Telemetry Capable: | Telemetry has the potential not only to improve the safety of our models by monitoring battery voltages, ESC temperature, and other critical parameters, but it also creates other opportunities to get even more fun out of flying because you’ve essentially reduced the risks of “unknown” inevitable crashes. Think of the benefits to be had from alarms that will sound to warn you when there’s interference about or if your receiver battery is running unexpectedly low. Requires purchase of Castle Telemetry Link for S.BUS2 (Item # 010-0152-00) and compatible Futaba Radio or Castle Telemetry Link for X-BUS (Item# 010-0148-00) and a compatible Spektrum Radio. |
Programmability: | Fully programmable Castle feature set using Castle Link USB adapter and freely downloadable Castle Link Windows software. (A small subset of the settings available through Castle Link Windows software can be accessed via manual programming through the transmitter stick). |
Firmware Upgrade: | Users will receive free access to all firmware updates, including added features sets using the Castle Link USB Programming Kit |
Castle Link Compatible
With the Castle Link USB Programming Kit you can use your Windows™ PC to easily program your controller. Castle Link includes all code for all Castle Link compatible hobby products in one convenient download. Note: Castle Link software requires a Castle Link USB Adapter and a computer that is running Windows. Castle Link is compatible with Windows Vista, Windows 7, Windows 8 and Windows 10. Macintosh users may take advantage of software such as Parallels Desktop, VMware Fusion, or Apple’s Boot Camp along with Windows Vista, Windows 7, Windows 8, or Windows 10 to run the Castle Link software, provided the Macintosh has an Intel processor. Macintosh installation is not supported by Castle Creations.
Additional Castle Link benefits include:
Access expanded programming and parameters for Castle controllers (see overview below)
Access to all firmware updates, including added features sets released from Castle Engineering, at no charge.
Intuitive Demo Mode capability
Option to default ESC to factory settings
Ability to save setup profiles for later use
Possibility to download and view data logs (on applicable controllers)
Talon Castle Link Settings Overview:
Throttle Vehicle Type: | Airplane | Helicopter | Control Line | External Governor |
Throttle type: | Auto-Calibrating Throttle | Fixed-Endpoints | Governor Mode:
Simple Gov Low/High Set RPM |
Fixed-Endpoints |
Fixed-Endpoints | Governor Mode:
Simple Gov Low/High Set RPM |
|||
Brake: | Strength
Ramp Delay |
– | Strength
Ramp Delay |
– |
Cutoffs: | Cutoff Voltage
Voltage Cutoff Type Auto-LiPo Volts/Cells |
Cutoff Voltage
Voltage Cutoff Type Auto-LiPo Volts/Cells |
Cutoff Voltage
Voltage Cutoff Type Auto-LiPo Volts/Cells |
Cutoff Voltage
Voltage Cutoff Type Auto-LiPo Volts/Cells |
Motor: | Start Power
Timing Direction PWM Rate |
Start Power
Timing Direction PWM Rate |
Start Power
Timing Direction PWM Rate |
Start Power
Timing Direction PWM Rate |
Other: | Power-On Beep
Link Live Enable BEC Voltage |
Power-On Beep
Link Live Enable BEC Voltage |
Power-On Beep
Link Live Enable BEC Voltage |
Power-On Beep
Link Live Enable BEC Voltage |
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet.