Risto Hölttä 6A speed controller 0.5 gr wo wires
26.00€Based on either MX-3A commercial ESC
Weight 0.50 g
Size: 12.9×11.6×3.4mm wo wires
Operating voltage 2.7 V … 4.2 V (never exceed 4.2 V!)
Max current 6 A
Regenerative braking (DampedLight)
Programmable with BLHeliSuiteMX-3A speed controller 0.39 gr wo wires
14.00€Weight:
- 0.39 g without cables
Max current: 5A. 5 sec max
Working current: 3A
Voltage:3.7-4.2V. 1S lipo
Size: 12.9×11.6×3.4mm wo wires
YEP 7 S speed controller 0.73 gr
16.00€Electronic speed controller for indoor airplane models
Weight without wires 0.73g
Max. 7A continuous
Use for 1S or 2S LiPo
Without BEC
Castle Creation Talon 15A speed controller 3.4 gr
36.00€Input Voltage Range: min: 2S LiPo, max: 4S LiPo
Max Continuous Amperage at full throttle: 15 amps
BEC Voltage: 5.5 volts
BEC Output: 8 amp peak, 3 amp continuous
Size:
- Width: 14.7mm (0.58″)
- Length: 27.9mm (1.10″)
- Depth: 8.1mm (0.32″)
Weight (with wires): 7.2 g (0.25 oz.)
Weight (without wires): 3.4 g (0.12 oz.)
Telemetry Link Capable: Yes, except Battery Current
Ultra light pico BEC for F3P by RH Design 0.3 gr
26.00€Ultra light BEC for F3P
Weight – 0.3 grams. 0.011 oz.
Max input voltage – 20V
The output voltage is programmable:
– 5.2 V
– 5.5 V
– 5.8 V (default)Max continuous current is 1.1 A (1.7 A max for a couple of seconds)
Ultra light voltage booster for F3P by Risto Hölttä 0.45 gr
26.00€Ultra light voltage booster for F3P
Standard output voltage 4.2 V ±0.05 V
Max continuous current (1S LiPo input, > 3.3 V) 0.9 A (with good airflow)
Momentary max current 1.1 A
Max momentary input voltage 6 V
Max input voltage range 0.7 V … 5 V
Efficiency ~90 % (depends on input voltage)
Recommended supply 1S LiPo
Weight 4.5 grams ±0.2 (0.016 oz)
Dimensions 11 x 16 x 2 mm
Speed controllers
- Home
- Donatas Pauzuolis RC Shop
- Equipment
- Speed controllers
© Copyright 2018. Donatas Pauzuolis RC Shop. All Rights reserved