How to make shaped carbon fiber rods
In our previous publications about shaped carbon fiber rod (CF rod) technology we have talked about advantages of it in indoor RC model building and step by step Rc model building by using it. In this article we will provide step by step tutorial how to make these shaped carbon fiber rods.
Composite F3P model building tips
There are several approaches to build composite F3P model out of carbon fiber rods. While I and my colleagues gain experience in model building using shaped carbon parts, we would like to share few tips about it.
Colibri F3P carbon plane by Dmitry, full building story
My friend Dmitry Starostov from Moscow developed his own design F3P carbon plane. Since Shaped carbon rod technology was available, his idea was to take this opportunity to create his own design model. So F3P Colibri Carbon was born. Some specs: Span 900mm Fuselage lenght 1040 mm AUW 43.5 gr with 130 mAh 1S battery Some materials list: Shaped carbon fiber rods 0.5 mm Standard carbon rods 0.5 and 0.28 mm Coaxial system New prototype RES-371gm, airscrews RES-15" Servos SPEKTRUM 2010 Please enjoy this build tutorial which is documented in detailed images by Dmitry. We will update this post with build progress. Also you can visit his site. Flight video
Finished modelDSC01621Finished modelDSC01617Maiden...Painting foamies
Most people think that for good looking painted foamie you need expencive airbrush and expert skills, i try to show this wrong opinion. Anyone can paint foamie using foam friendly spray cans, stencils and markers. With little patient and few hours of work you can have foamie that will look maybe even better than some airbrush work! Here is some examples ant tips, all planes are painted with spray cans
Beveling tool
I mentioned that i will show "Know how" tricks in near future, so here it is very useful tool for foam planes builders Beveling tool. With it you can easily make even good looking 45 degree angle cut outs on ailerons, elevator, rudder and torque box lines. It is very easy to build and use. Here is items you will need to build this tool: 3 ore 6mm balsa sheet ( depending on what thickness depron you will use). Sharp shawing blade, as you see yu will have two parts from one blade. Balsa stick ~10x10mm Jigsaw for 45degree balsa stick cutting. Template for 45 degree cutting ( it also can...