Author - Žilvinas Lapačinskas

F3P Schedules for 2018 2019 seasons AP, AF, AA

Hi F3P enthusiasts. Please find attached Official F3P schedules AP-19, AF-19 and AA-19 with manoeuvre descriptions and Aresti. Preliminary AP-19 F3P schedule AP-19 maneuvre description F3P schedule AP-19 Aresti Final F3P schedule AF-19 maneuvre description F3P schedule AF-19 Aresti Advanced F3P schedule AA-19 maneuvre description F3P schedule AA-19 Aresti   Happy training!!!

Read more...

Extreme Flight 3DHS Slick 540. Exsculsive interview with Jase Dussia

It was big pleasure to be back in USA and visit Joe Nall 2017. We did not waste time and between many flights record this interview video with Mr.Jase Dussia. In my opinion this young gentleman and Extreme Flight RC/3D Hobby shop guys create the best freestyle plane ever. Video demonstrate many technical details behind this project, some vital setup secrets and naturally mind bending flights of Jase (The Ace) Dussia. I flown this plane once during Joe Nall, and immediately it was clear that this plane is true champion. Such fast/sharp response and at same time everything can be performed with highest level [...]

Read more...

Colibri F3P carbon plane by Dmitry, full building story

My friend Dmitry Starostov from Moscow developed his own design F3P carbon plane. Since Shaped carbon rod technology was available, his idea was to take this opportunity to create his own design model. So F3P Colibri Carbon was born. Some specs:Span 900mm Fuselage lenght 1040 mm AUW 43.5 gr with 130 mAh 1S batterySome materials list:Shaped carbon fiber rods 0.5 mm Standard carbon rods 0.5 and 0.28 mm Coaxial system New prototype RES-371gm, airscrews RES-15″ Servos SPEKTRUM 2010Please enjoy this build tutorial which is documented in detailed images by Dmitry. We will update this post with build progress. Also you can visit his site. Flight videoFinished modelDSC01621Finished modelDSC01617Maiden flight of a CollibriDmitry with CollibriCanalizer installedCanalizer [...]

Read more...

New possibilities in rc model building with shaped carbon rod technology

Few years ago the only choice of building material was depron with some very rare exceptions (for example, Alexey Lantsov who seems never used foam for his models). According to today’s tendencies, F3P schedules get more are more complex, competitions get tougher. Model’s lightness and precision become key issues. And it doesn’t matter which class of indoor rc planes will You focus on – F3P pattern, aeromusicals or even fun flying – modellers give priority to the carbon fiber rods covered with mylar film for their models over the depron for some time already. The result of such choice is obvious – very light, [...]

Read more...